Instructions / Assembly

2
You are now ready to connect your fountain to the power source. The plug from the adaptor
can be connected to any suitable indoor or outdoor GFCI protected socket.
If connecting outdoors you must also ensure you connect the plug within a suitable weather
proof enclosure. The adaptor itself is suitable for outdoor use but the connection to the power
source must be within a weatherproof area.
Once connected water will begin to flow, cascading down through the different levels and the
lights will switch on to highlight the fountain.
Connection & Operation
0°C/32°F
û
ü
Frost can cause damage to the pump and fountain. The pump MUST be
removed if the water is likely to freeze. We also recommend storing your
entire fountain in a frost proof environment if temperatures are likely to
remain consistently below freezing.
Frost
Maintenance
ALWAYS shut off the power before cleaning and maintenance.
· Regularly change the water and clean to prevent the build up of sediment and algae.
· Regularly check the water level, particularly in hot weather and always ensure the water
level is above the pump.
· Switch off power when the fountain is not in use for long periods of time.
If the pump fails to operate check the following:
1. Check if the power is correctly connected
2. Check if sufficient water is inside the reservoir
3. Check the pump and tubing for any form of obstructions
4. Check and clean the pump by rinsing all the parts through with water.
If the pump continues to fail contact customer services (refer to contact sheet or website).
www.smartsolar.com
© Smart Solar Ltd. 46200Ev1.0
Warranty
If within 12 months from the date of purchase this product fails due to a defect in material or
workmanship. Smart Solar will replace or repair it free of charge.
The warranty does not apply to:
Damage caused by accidents, abuse, poor handling, frost or normal wear and tear. Products
that have been subject to unauthorized repair or modification.
For further information please contact your nearest service centre detailed below:
Tel: [phone] Email: [e-mail]