Instructions / Assembly

ManualsBrandsSmart Garden ManualsKitchenLucerne Lion's Head Electric Fountain with LED

Lucerne lion’s head fountain

1. Pass the hose from the upper back panel through the lower back panel and fix them

together using the screws provided.

2. Connect the lower light unit to the pump and position both of them in the base.

3. Position the upper light unit, run the cable down the back and connect it to the pump,

then lower the back panel onto the base.

4. Place the cover over the pump and ensure all cabling is neatly hidden.

5. Fill the reservoir with water to the desired level ensuring the pump is covered.

6. Run the cable neatly from the back of the fountain and plug into the adaptor unit.

Ensure the connector is water tight by screwing the retaining collar into position.

Note: Pump MUST never be used dry. Water must be regularly topped up. We recommend

regularly changing the water to ensure it remains clean and free from debris.

Assembly

1 3

Summary of content (4 pages)

PAGE 1
Lucerne lion’s head fountain Assembly 1 3 2 4 1. 2. 3. 4. 5. 6. 5 6 Pass the hose from the upper back panel through the lower back panel and fix them together using the screws provided. Connect the lower light unit to the pump and position both of them in the base. Position the upper light unit, run the cable down the back and connect it to the pump, then lower the back panel onto the base. Place the cover over the pump and ensure all cabling is neatly hidden.
PAGE 2
Connection & Operation You are now ready to connect your fountain to the power source. The plug from the adaptor can be connected to any suitable indoor or outdoor GFCI protected socket. If connecting outdoors you must also ensure you connect the plug within a suitable weather proof enclosure. The adaptor itself is suitable for outdoor use but the connection to the power source must be within a weatherproof area.
PAGE 3
Rev.A OCEAN KEY INSTRUCTIONS OK130LV12V60 PUMP Ocean Key pumps are carefully inspected and tested to ensure both safety and operating performance for pond and fountain applications. However, failure to follow the instructions and warnings in this manual may result in pump damage and/or serious injury. Be sure to read and save this manual for future reference.
PAGE 4
-MAINTENANCEA clogged or dirty intake screen will greatly reduce performance. If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris contacting the intake. If less flow is desired, adjust it with the flow control. Never restrict the pump’s intake. To clean the pump, remove the front plate and the impeller. Use a small brush or stream of water to remove any debris. CAUTION: The pump shaft cannot be removed.