User's Manual
Smart Bulb User Manual
Safety
Please read all of the safety and operating instructions before using your device:
1. The Products are only for indoor use.
2. Do not disassembly the device or attempt to repair.
3. Plug the power cables into properly grounded electrical outlets in order to help
prevent against electrical shock.
4. Disconnect the power before you clean the device.
5. When abnormalities of the device occur, turn off the main power supply from
circuit breaker. Wait a moment before turn on the power supply again.
6. The devices are not suitable for use in situations or environments where failure,
delay or errors or inaccuracies in the data or information provided by the devices
could lead to death, personal injury or severe physical or environmental damage,
including without limitation in connection with the operation of nuclear facilities,
aircraft navigation or communication systems, air traffic control, or life support
systems.
7. Do not subject the product to wet, moist or excessively dusty environments as this
may cause damage.
8. The bulb allows wireless dimming. The bulb is not suitable to use with wired
dimmers.
Light Bulb Specification
Model No: SBR-600/ SBW-1000
Input: AC 120V~, 50-60Hz
Rated Wattage: 7W(SBR-600)/12W(SBW-1000)
Environment: Indoor use -20˚C to 40˚C (Operating)
FCC ID:2AKSESB
_User Manual