Users Manual

iGlucose® 25
preparing the lancing device
1. Hold the adjustable depth cap of the lancing device in one hand
while holding the base in the other hand. Slightly force downward
to separate the two parts. Please see drawing below.
2. Pull the two parts in opposite directions to remove the
adjustable depth cap.
3. Insert a new disposable lancet firmly into lancing device.
4. Twist off and set aside the protective cover of the disposable
lancet. This round piece will be used later to dispose of the
used lancet.
5. Replace the depth adjustable cap firmly.
6. Choose a depth of penetration by rotating the top portion of
the depth adjustable cap until your desired setting is visible in
the window. Settings are based on skin type:
a. “ “ for soft or thin skin;
b. “ “ for average skin;
c. “ “ for thick or calloused skin.
7. Prepare (cock) the lancing device for a finger stick by holding
the base of the lancing device in one hand and pulling on the
plunger with the other hand, please see drawing #7 below. The
device will be cocked. Release the plunger and it will automatically
move back to its original position near the base.