Users Manual

iGlucose® 35
understanding test results and messages
Blood glucose test results are shown on the iGlucose® Blood Glucose
Meter as mg/dL.
If your blood glucose result is unusually high or low, or if you question
your test results, repeat the test with a new iGlucose Blood Glucose
Test Strip.
Caution is advised when glucose values are below 50 mg/dL or
above 250 mg/dL. Consult a Physician as soon as possible, if values
in this range are obtained.
You can also run a quality control test with the Rightest® Control
Solution GC550 to check your iGlucose Meter and iGlucose Test Strip
(Refer to “Performing a Quality Control Test”).
If the test result still remains unusually high or low, contact your
healthcare professional immediately.
Insucient
blood sample
Sucient
blood sample
view window appearance
Make sure your blood sample covers the whole area of the view
window to get an accurate test result. An insufficient blood sample
will result in an error message. If this occurs, discard the used strip
and repeat the test with a new test strip.