User's Manual

www.smartradarsystem.com
RM68-01 User Manual 페이지 10
2.2.3 Mini-USB Connector
The connectivity is provided through the mini USB connector over the onboard FT2232H(FTDI).
The FT2232H is a USB 2.0 High Speed to Dual UART IC.
2.3 Switches and LEDs
2.3.1 Sense-on-Power (SOP) Switch
The IWR6843 device can be set to operate in three different modes based on the state of the SOP
lines. These lines are sensed only during boot up of the IWR device. The state of the device is
detailed by Table 3.
Table 3 SOP Switch for Boot mode
SW
NUM
SOP
MODE
FUNCTION
Flashing
Debug
3
SOP 2
OFF
ON
OFF
2.3.2 Reset Switch
Used to RESET the IWR6843 device.
2.3.3 LEDs
Table 4 provides the switch and LED information.