User's Manual

www.smartradarsystem.com
RM68-01 User Manual 페이지 13
4. Software Setup
4.1 Configure Your PC
This connection provides the following interfaces to the PC:
• UART1 for flashing the onboard serial flash, downloading FW through Radar Studio, and
getting application data sent through the UART.(ex, COM5)
• MSS logger UART2 (can be used to get MSS code logs on the PC).(ex, COM6)
When the USB is connected to the PC, the device manager should recognize the following COM ports.
4.2 Software, Development Tools, and Example Code
To enable quick development of end applications on the C67x DSP and R4F core in the IWR6843, TI
provides a software development kit (SDK) that includes demo codes, software drivers, emulation
packages for debug, and more. These can be found at mmwave -sdk.
Figure 4. Device manager on the PC