Installation Guide

ManualsBrandsSmart Solar ManualsBird & Wildlife SuppliesSunflower Glass Solar Birdbath

Solar-on-Demand Birdbath / Fountain

Smart Solar is a Smart Living Home & Garden brand

Telephone: + 1 813 343 5775

Email: customerservice@smartlivinghg.com

Web: www.smartlivinghg.com

US Patent 7484671 & EU Patent 1648620

* Styles may vary but assembly will be consistent with this manual

Birdbath & Metal

Stand with Ring

Birdbath

2-Tier

Fountain

Birdbath & Metal

Stand with Bolts

Smart Living Home & Garden warranties your solar panel, pump and battery (for Solar-on-Demand units) for one (1) year from

the original date of purchase from authorized distributors and retailers. The warranty covers parts that are properly installed

and regularly maintained. If the product fails due to a defect in material or workmanship, Smart Living will replace the defective

parts free of charge. Your fountain is designed for outdoor use and with proper care will last for many years. If over time your

fountain develops scratches or minor wear from normal use, you can contact our customer service department for easy to apply

one step touch up paint.

Please unpack and inspect the entire product upon receipt. Report any broken or missing pieces within five (5) business days of

receipt to our customer service department and we will provide replacement parts free of charge. Please do not discard any

damaged parts until instructed to do so by our customer service department.

PROBLEM

RESOLUTION

The fountain is in sun but the pump

is not working.

1. Ensure the connections are secure and that pump tube is

connected to underside of solar panel – see pg 7 for Assembly

reference

2. Pump needs manual start - see pg 6 Pump Troubleshooting

1. Try manual start on pump – see pg 6

2. Ensure the tubes from pump are connected to the underside

of the solar panel - see pg 7 for Assembly reference

Rubber bung is not securely in place.

1. Push the rubber bung securely into the reservoir hole to

create a seal – see pg 7 for Assembly reference

1. Boost charge the battery – see pg 4 for Battery reference

No water flow from the top of

the solar panel.

2-Tier Only: Water is coming through

the top of the solar panel, but the

water is not overflowing from the

spouts into the main bowl below.

Fountain will not run on battery.

Thank you for purchasing this Smart Solar fountain.

https://smartlivinghg.com/wp/customer-service/product-registration/

FAQs are available online along with step by step video tutorials to help you with pump

cleaning and solar kit assembly.

Visit: https://smartlivinghg.com/wp/customer-service/faq/

Fountain Heads

Warnings

The 360˚ fountain head

accessory can be used to

enhance your fountain.

Note: It will only work

effectively in bright sunlight

or if battery is charged.

The short nozzle can be used to

produce a finer higher

stream of water.

Note: May need to be

removed in bright sunlight to

avoid splashing.

Frost causes damage, store whole product inside during cold weather.

0°C/32°F





Important!

Water must be regularly topped off. We recommend regularly changing the

water to ensure it remains clean and free from debris.

Summary of content (8 pages)

PAGE 1
Solar-on-Demand Birdbath / Fountain * Styles may vary but assembly will be consistent with this manual Birdbath & Metal Stand with Ring Birdbath & Metal Stand with Bolts Birdbath 2-Tier Fountain Fountain Heads The 360˚ fountain head accessory can be used to enhance your fountain. Note: It will only work effectively in bright sunlight or if battery is charged. The short nozzle can be used to produce a finer higher stream of water. Note: May need to be removed in bright sunlight to avoid splashing.
PAGE 2
Open frame. Affix bolts and wingnuts, and attach bowl. Place Bowl. Insert Solar panel/pump. Attach metal ring to frame. Place Bowl. Insert Solar panel/pump. Fill bowl with water. . Open frame. 2 Fill bowl with water.
PAGE 3
Attach bowl to pedestal. Align the marks and turn to lock in place. If your fountain includes Accents, locate the pin on the accent pieces and insert into the holes around the edge of the bowl. Place the solar panel/pump assembly into the reservoir. Fill bowl with water. Attach bowl to pedestal. Align the marks and turn to lock in place. If your fountain includes Accents, locate the pin on the accent pieces and insert into the holes around the edge of the bowl.
PAGE 4
IMPORTANT! Important!    When reconnecting the pump and panel take care to ensure that the connectors are water tight. Slightly twist the connectors when pushing together, ensure the red o-ring seal remains in it’s groove and it is not displaced. . Position   Position your fountain so that receives direct sunlight. The fountain will NOT work if the solar panel is in a shaded area. Battery Rechargeable battery packs become less efficient with repeated charge and discharge cycles.
PAGE 5
Performance NOTE: Unit is supplied in off (0) position to protect battery, rotate switch to operate. This product is designed primarily to operate in summer months but will also work in spring and autumn provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received. Switch always on (l) This mode should be used if you want your water feature to operate during the day with consisten performance.
PAGE 6
Connections    ! Important Ensure connections are water tight. Maintenance To maintain optimum performance, regularly clean the solar panel using water or glass cleaner in conjunction with a non-abrasive sponge or cloth. If the fountain head, nozzle, or tubes become blocked, rinse through with water. Pump Cleaning / Troubleshooting Filter cover can simply be pulled apart as shown. Remove filter material and rinse in water.
PAGE 7
Pump Removal / Assembly 2-Tier Fountain Remove the top tier and turn upside down on a soft surface. As you turn, ensure the solar panel is supported so that it does not fall out. Remove the pump from the connecting tubes and disconnect the cable. Important To ensure the tubes from the pump are connected to the solar panel, try lifting the solar panel gently by pulling on the solar panel nozzle. If the panel lifts out the tubes are not connected. See illustration below for assembly.
PAGE 8
Thank you for purchasing this Smart Solar fountain. Register your Product Here: https://smartlivinghg.com/wp/customer-service/product-registration/ FAQs are available online along with step by step video tutorials to help you with pump cleaning and solar kit assembly. Visit: https://smartlivinghg.com/wp/customer-service/faq/ PROBLEM RESOLUTION The fountain is in sun but the pump is not working. 1.