Instructions / Assembly

2 3

Performance

Anchor Back

Solar Panel Mounting / Position





Position the solar panel to receive the

maximum amount of direct sunlight.





Connections

Ensure connection from solar panel to pump are water tight.

Important!

This product is designed primarily to operate in summer months but will also

work in spring and autumn provided there is good sunshine. Performance is

directly related to the amount and strength of sunlight received.

Pump Cleaning / Troubleshooting

Filter cover can

simply be pulled

apart as shown.

Turn off impeller

cover to release

as shown,

impeller can be

easily removed

Remove filter

material and

rinse in water.

Rinse all parts

thoroughly in

water.

If the pump is not working immediately, try the

following for a manual start. Remove the

pump cover. Remove the impeller cover, face

the panel to the sun, and start manually

spinning the impeller clockwise, this can

take 1-3 minutes.

PAGE 1
Anchor Back Performance This product is designed primarily to operate in summer months but will also work in spring and autumn provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received. Solar Panel Mounting / Position   Pump Cleaning / Troubleshooting Position the solar panel to receive the maximum amount of direct sunlight. Connections Important!    Filter cover can simply be pulled apart as shown.
PAGE 2
Sunjet 150+ Maintenance To maintain optimum performance, regularly clean the solar panel using water or glass cleaner in conjunction with a non-abrasive sponge or cloth. Assembly The Sunjet 150+ can be placed under water or can float on the water surface. Your choice will depend on the water depth and type of reservoir used. If the water depth is shallow, we suggest the under water assembly. For deeper reservoirs or ponds, you will need to use the floating assembly.