Use and Care Manual

ManualsBrandsSmart Solar ManualsKitchenCeramic Solar Cascade Fountain with Green Bamboo Finish

Smart Solar is a Smart Living Home & Garden brand

Telephone: + 1 813 343 5775

Email: customerservice@smartlivinghg.com

Web: www.smartlivinghg.com

Smart Living Home & Garden warranties your solar panel, pump and battery (for Solar-on-Demand units) for

one (1) year from the original date of purchase from authorized distributors and retailers. The warranty covers

parts that are properly installed and regularly maintained. If the product fails due to a defect in material or

workmanship, Smart Living will replace the defective parts free of charge. Your fountain is designed for outdoor

use and with proper care will last for many years. If over time your fountain develops scratches or minor wear

from normal use, you can contact our customer service department for easy to apply one step touch up paint.

Please unpack and inspect the entire product upon receipt. Report any broken or missing pieces within five (5)

business days of receipt to our customer service department and we will provide replacement parts free of

charge. Please do not discard any damaged parts until instructed to do so by our customer service department.

PROBLEM

RESOLUTION (and page for reference)

The solar panel is in direct sunlight

but the pump is not working.

1. Ensure the connectors from the pump to the solar panel are secure

- see pg 6

2. Ensure the pump is connected to the tube securely - see pg 2-3

3. Try Manual Pump Start - pg 7

4. (For Cascade) Ensure the tube is correctly attached to the jug

There may be an air bubble in the tube.

1. Try pouring water down the tube to force out the air bubble, then

reattach to pump.

2. For Cascade: remove tube from top jug and submerge entire tube in

main bowl. Once water is flowing out of the tubing, reattach to jug.

The pump is running but there is no

water flow.

Check the tubing that attaches from the pump to the tube. Most likely

the rubber bung is not tight enough in the hole that goes into the jug.

Cascade: Water is leaking from Jug

Thank you for purchasing this Smart Solar fountain.

https://smartlivinghg.com/wp/customer-service/product-registration/

FAQs are available online along with step by step video tutorials to help you with pump

cleaning and solar kit assembly.

Visit: https://smartlivinghg.com/wp/customer-service/faq/

Solar Fountain with Remote Solar Panel

Cascade

Spouting Tabletop

Warnings

0°C/32°F





Important!

Water must be regularly topped off. We recommend regularly changing the

water to ensure it remains clean and free from debris.

* Styles may vary but assembly will be consistent with this manual

Frost causes damage. Store whole product inside during cold weather.

Summary of content (8 pages)

PAGE 1
Solar Fountain with Remote Solar Panel * Styles may vary but assembly will be consistent with this manual Spouting Tabletop Cascade Warnings Water must be regularly topped off. We recommend regularly changing the water to ensure it remains clean and free from debris.   0°C/32°F Important! Frost causes damage. Store whole product inside during cold weather.
PAGE 2
Spouting Tabletop Assembly Feed cable through hole. Fit tube and bung to pump. Insert pump with tube/bung assembly into the bowl. Position the pump so the tube protrudes through the hole in the bowl. Lower the spouting feature onto the tube. Ensure the bung seals, then lock the feature onto the bowl by turning slightly. Fill the bowl with water, ensure it is regularly topped off.
PAGE 3
Cascade Assembly 9 8 7 2 3 4 6 5 1 Assemble metal stand and place bowls in the order shown. IMPORTANT: Place large bowl on metal stand before adding small bowls and jug. a Metal Ceramic 4 5 3 6 2 1 Attach tubing to pump and place in bowl. Pass tubing through top ring and fit to jug (use bung with ceramic or push straight on with metal jugs.) Use clips to hold tubing to frame and fill bowl with water.
PAGE 4
Panel Mounting . Position   Position the solar panel to receive the maximum amount of direct sunlight. Warnings Water must be regularly topped off. We recommend regularly changing the water to ensure it remains clean and free from debris.   0°C/32°F 4 Important! Frost causes damage. Store whole product inside during cold weather.
PAGE 5
Performance This product is designed primarily to operate in summer months but will also work in spring and autumn provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received.  In bright direct sunlight your pump will work well with a consistent fountain height and flow rate.  In bright direct sunlight your pump will work well with a consistent fountain height and flow rate.
PAGE 6
Connections Important!    Ensure connection from solar panel to pump are water tight. Important! Ensure connection from solar panel to pump are water tight.
PAGE 7
Maintenance To maintain optimum performance, regularly clean the solar panel using water or glass cleaner in conjunction with a non-abrasive sponge or cloth. Pump Cleaning / Troubleshooting Filter cover can simply be pulled apart as shown. Remove filter material and rinse in water. Turn impeller cover to release as shown, impeller can be easily removed Rinse all parts thoroughly in water. If the pump is not working immediately, try the following for a manual start. Remove the pump cover.
PAGE 8
Thank you for purchasing this Smart Solar fountain. Register your Product Here: https://smartlivinghg.com/wp/customer-service/product-registration/ FAQs are available online along with step by step video tutorials to help you with pump cleaning and solar kit assembly. Visit: https://smartlivinghg.com/wp/customer-service/faq/ PROBLEM RESOLUTION (and page for reference) The solar panel is in direct sunlight but the pump is not working. 1.