SAN-385 Sani-T Compact Air Purifier PLEASE READ INSTRUCTIONS BEFORE USING AND SAVE FOR FUTURE REFERENCE
PRODUCT SPECIFICATIONS Model No. SAN-385 Power Rating 30 W Voltage Rating 24 V DC Noise (Max) 53 dB(A) CADR (Clean Air Delivery Rate) 114 CFM (Cubic Feet/Minute) Room Size 230-260 Sq. Ft. Sensors 1 x Infrared Sensor Display Indicators 5 x Touch Buttons for Functions (Fan Speed, On/Off/Auto, Light Mode, Filter, Timer), 1 x Air Quality Indicator Color Ring Features Touch Glass Control Panel Product Size 8.66" Dia x 13.78" H Net Weight 4.51 lbs. (6.
WARNING !!! TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: • I nspect the unit prior to use. Check power cord to ensure there is no damage to insulation. If the unit shows any signs of being dropped or damaged, do not plug in and contact the manufacturer. •A lways disconnect the power cord from electrical outlet before performing any maintenance or replacing the filter. • Never operate the unit without the filter installed. •D esigned for indoor use only. Do not attempt to use outdoors.
PRODUCT OVERVIEW Air outlet Light Ring Control Panel Interface Air Inlet Power Inlet Power Adapter Base/Filter Cover The SAN-385 Compact Air Purifier uses and infrared sensor to monitor the air quality in the surrounding area. Based on the reading by the infrared sensor, the SAN-385 will illuminate the Air Quality Indicator Light to the color specific to the air quality.
LOCATION & SET UP Place the unit upright on a dry, flat surface indoors. Do not place too close to walls as this may affect the sensors and reduce the performance of the unit. We recommend keeping the unit a minimum of 8" away from walls. Do not use in high humidity areas of the home such as bathrooms etc. Do not cover or block the vents. The Air Intake holes on the base pull air into the unit. The vent blades on top of the unit expel purified air.
FIRST USE When you plug the unit into the electrical outlet, it will beep once to alert you that it is receiving power. and the unit will beep again confirming it is Press the Power button now turned on; the Control Panel will illuminate. Once turned on the infrared sensor will analyze the surrounding air. When analyzing, the display may cycle through the colors on the Air Quality Ring. Within approx.
THE CONTROL PANEL AIR QUALITY RING display Illuminates GREEN, YELLOW or RED depending on quality of the air TIMER display Indicates current timer selected AUTO display Illuminates when unit is in AUTO mode. If you cycle through FAN SPEED, the Auto will illuminate to let you know you are back in AUTO mode FILTER LIFE button Illuminates in RED when it is time to change the filter OR Hold for 3 seconds to reset the Filter Life indicator after installing new filter.
CLEANING & MAINTENANCE IMPORTANT! Always unplug the purifier from the electrical outlet before cleaning and/or changing the filter. Cleaning the Air Intake We recommend you clean this regularly for optimal performance. If not cleaned regularly, it may reduce the performance of the air purifier. Remove the Base/Filter cover from bottom of purifier and take out the filter. Use a handheld vacuum attachment or a dry, soft cloth to remove any dust/dirt particles from the air intake holes.
REPLACING THE FILTER We recommend ordering a new filter when there is approx. 25% life left in the current filter. When the filter needs to be replaced, the Filter Life button will illuminate in RED to indicate a replacement filter is needed. Unplug the unit from the electrical outlet and gently place it upside down to access the filter cover on the bottom of the unit. When the filter cover is locked, the arrow will be pointing to the FULL CIRCLE. Turn the filter cover to the left to unlock it.
REPLACING THE FREQUENTLY ASKED FILTER QUESTIONS Does this unit emit ozone? No, Sani-T air purifiers do not emit any ozone. How often do I need to change the filter? The filter life is 3,000 hours. If used in Auto Mode, the filter will last approx. 4 months How do I know when I have to change the filter? The Filter Life button will turn RED to alert you that it needs to be replaced. Can I wash the filter? No. The filter cannot be washed. It must be replaced with a new filter.
CLEANING &INFORMATION WARRANTY MAINTENANCE In order to register your warranty with us, please list out the information in the warranty box below and email the completed information to customerservice@smartlivinghg.com Or you can register online at: smartlivinghg.com/registration Name Email Model No.
For assistance with this product, please reach out to our customer service team. Most issues can be easily resolved over the phone or via email. Tel: 813.343.5775 (Mon-Fri 9am – 5pm EST) Email: customerservice@smartlivinghg.com You can also visit our website to view the FAQs, video walk throughs or to order replacement filters. Website: https://smartlivinghg.com FAQs: https://smartlivinghg.com/faq Parts: https://smartlivinghg.com/parts Sani-T is a Smart Living Home & Garden brand ©2021 V21.
