Spa & Hot Tub Necessities Cover Butler Cover Lifter Installation & Use Manual
The Cover Butler adjusts to fit most square/rectangular spas up to 99” in width. When assembled it forms a rectangular shape. The Cover Butler attaches to the back of the spa cabinet, either on the back wall of the cabinet or on the pedestal base. The Bridge Arm (C) lies across the spa cover parallel to the seam (hinge) of the cover and is “captured” when the cover is folded back over it.
PARTS LIST Part A B C D E F G H I Description QTY Corner Piece 42” Side Arm 59” Bridge Arm Mounting Block Retaining Chain Chain Bracket Metal Screw #10 x 5/8” Wood Screw #8 x 5/8” Wood Screw #8 x 1-1/4” 4 2 2 2 2 2 30 6 8 F A D E B C
1. Lay out the components in the shape of a rectangle as shown below (Fig A). There are 2 sets of Corner Pieces (A). They have been drilled so that the top left and bottom right are the same as are the top right and bottom left. When assembling, position all Corner Pieces so that the pre-drilled holes are FACING UP. NOTE: The LONG SIDE of the Corner Pieces goes Across the spa. The SHORT side goes on each SIDE of the spa.
1.5” clearance between spa and inside arm of Cover Butler Mounting Blocks Fig. B 5. Next connect these two assembled pieces together with the Side Arms (B) by sliding the Side Arms into each of the four Corner Pieces as shown in Fig. A DO NOT secure with screws yet. 6. With the Spa Cover in place on your Spa Cover in place on your Spa, lay the assembled rectangle assembly on the spa with the Mounting Blocks at the bottom as shown in Fig. C. Remember, screws face up.
7. Mount the Mounting Blocks as wide and as low as possible. Attach the two Mounting Blocks to the cabinet pedestal or base of spa cabinet it there is no pedestal, with the 1-1/4” Wood Screws (G) provided. NOTE: Mounting Blocks may be attached directly to deck surface or use Universal adaptor bracket available from your dealer for round, oval or octagonal spas. 8.
LIMITED LIFETIME WARRANTY SPAccessories warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a Limited Lifetime Warranty. This warranty extends only to the original purchaser. SPAccessories’ obligation under this warranty is limited to replacing or repairing, at SPAccessories’ option, the product at one of its authorized service centers.
Spa & Hot Tub Necessities SPAccessories, LLC. 11900 N. La Canada Dr.
