Technical Specifications
Page 1 of 2
MATERIAL SAFETY DATA SHEET
Product Identification: Molded Polyurethane Anti-Fatigue Mats
Product Category: Polyurethane Foam
Manufacturer: Meramec Group
338 Ramsey Drive
Sullivan, MO 63080
Telephone Number: 573-468-3101
Date Prepared: July 1, 2009
CAS #
% by Weight Exposure Limit
Polyurethane Foam 9009-54-5 100 Not Established
Meramec polyurethane foam is a fully cross-linked reaction product of polyols, isocyanate,
catalysts, surfactants, pigments and blowing agents. Polyurethane is a polymeric material
consisting of repeating units of carbon, hydrogen, oxygen and nitrogen.
EMERGENCY OVERVIEW
• Abrasive blasting, sanding or grinding of this product could generate nuisance dust.
• Decomposition gases will be generated at temperatures greater than 450ºF, which would
be harmful to health if inhaled.
EFFECTS OF OVEREXPOSURE
• INHALATION: Grinding dust may cause mechanical irritation to the respiratory tract.
• SKIN: Essentially non-irritating to skin.
• EYES: Grinding dust may cause mechanical irritation.
• INGESTION: Not expected as a route of exposure.
III. HAZARDS IDENTIFICATION
EMERGENCY AND FIRST AID PROCEDURES
• INHALATION: Remove to fresh air. Consult a physician.
• SKIN: No adverse effects anticipated.
• EYES: Irrigate with water for at least 5 minutes.
• INGESTION: No adverse effects anticipated.
I. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
II. COMPOSITION / INFORMATION ON INGREDIENTS
III. HAZARDS IDENTIFICATION
IV. FIRST AID MEASURES