User's Manual

Normal Keypad operation:
• If the user enters a 4-digit code that is matched to one of the
25 stored codes. The STATUS light should blink twice and the
beeper should beep twice to confi rm that a matched code is
entered.
• No more than 20 key presses are allowed to obtain the 4-digit
entry code.
Example:
1234 is one of the codes stored in one of the memory location.
The user can enter ‘x1234’ or ‘xxxxxxxxxxxxxxxx1234’ and
the gate should be activated (x is any key). If more than 20 key
presses is entered without matching one of the codes then the
unit’s STATUS light should be fl ashing rapidly and no entry will
be accepted for the next 40 seconds. The user must not enter
any code for at least 40 seconds before the unit returns to nor-
mal operation; otherwise it remains in this ‘lock-down’ mode.
Once the user enters a matched code, any subsequent key press
within the next 40 seconds will re-activate the keypad.
Delete ALL Entry Codes:
• Press and release PROGRAM button.
• Enter the Master Code then press and release PROGRAM
button.
• Enter 0, 7 then press and release PROGRAM button.
• Beeper beeps 3 times to confi rm that the All Entry Codes are
deleted.
Example: Key press sequence to delete all entry codes from
memory. (3121 is the Master Code)
The round black dot is the ‘PROGRAM’ button.
Keying Indication Summary:
Keying Error Alert Indication Keying accepted confi rmation Indication
Keying Error Alert Indication Keying accepted confi rmation Indication
Keying Error Alert Indication Keying accepted confi rmation Indication
Master Code Setting Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Master Code Setting Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Master Code Setting Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
Permanent Entry Code Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Permanent Entry Code Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Permanent Entry Code Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
Temporary Entry Code Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Temporary Entry Code Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Temporary Entry Code Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Setting STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
Setting STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
Setting STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
Entry Code Matching Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Entry Code Matching Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
Entry Code Matching Speaker: continuous Beep for 2 seconds Speaker: Beep – Beep – Beep
(after non-matching 20 keying)
(after non-matching 20 keying)
(after non-matching 20 keying)
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
STATUS light: rapid fl ashing STATUS light: no light, no fl ashing
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7
1 2 3 4 0 7