User's Manual

ManualsBrandsSmart Technologies & Investment ManualsAlarm SystemsBluetooth Personal Alarm

I. Parts Overview

II. SPECIFICATIONS

III. PARTS & FUNCTIONS

IV.

DOWNLOAD APP

V. CONNECTING DEVICE

VI. SETTING THE DEVICE ON APP

Wireless Connectivity

Battery

Voltage 3V~4.2V

Alarm Siren Up to 120db

Charging Micro USB cable

Working Temperature -10℃~45℃

IP Rating IPX4, weatherproof

Dimension 65 x 38 x 30mm

Weight 20g

200mAh,4.2V,Lithium

Bluetooth 5.0

LED Ring Light

This bright visible light serves as safety warning signal when out and

about in the dark.

Setup Button

Activate or deactivate the LED light with a short press using this

button located on the left side of the device

Alarm Button

1) Trigger a loud audible

120db alarm to call for

attention and help with a

2-second long press on

this button. To cancel the

audible sound, press the

setup button together

with the alarm button.

2) When in danger, send location

notification and ask for help from

your listed emergency contacts.

Trigger a silent alert with 2- short

presses on this button . To cancel

this silent alert, press the Setup

Button together with the Alarm

Button within 3-30secs as per App’s

setting.

Clipper

Conveniently position the device with this easy clip on to your side

pocket, collar, sleeve, belt, bag or anywhere you can visibly

reach in case of danger and emergencies.

Strap/string hole

Insert a fancy strap or string for a stylish convenience

Micro USB port

Fast charge the device using a micro USB cable either plugged on

a computer or direct power supply

Open the App and allow App to access to your location. Then

permit App to send you notifications. You maybe prompted by

pop up screens according to the iOS or Android procedures.

Click on "Connect Device" then "Add Device". Allow App to use

Bluetooth if a pop up screen prompted.

On your alarm device, press the Setup Button

for 2-secs. The LED will blink rapidly to indicate

its ready for pairing. Click on “MD328E” while

the LED is

blinking.

Click OK then select the device you just

added to go on the main screen of the App.

IMPORTANT

If pop up screens did not show up, go to

your phone Settings then look for Run

Guardian App. Check if Run Guardian

settings are correct.

Is Location set as ALWAYS?

Have you turn ON notifications?

Have you ALLOW access to Bluetooth?

Location- ALWAYS

Notifications- ON

Bluetooth - ON

While on the main screen, click on Settings ( ) to

proceed setting up the device with the App

VII. CHARGING

IX. CARE TIPS

X. WARNING

VIII. HOW TO USE

Your device battery has been pre-charged enough to setup the

device and the App after unboxing. Before using the device

outdoor, make sure your device has been fully charged or have

enough battery. Check the battery status on the main screen of

the APP on your mobile phone.

Battery warning: This device uses a lithium battery. If the following

guidelines are not followed, the life of the lithium-ion battery in the

device may be shortened or there is a risk of damage to the device,

fire, chemical burn, electrolyte leakage and / or injury.

Do not disassemble, puncture or damage the device or battery.

Do not remove or try to remove the battery that the user cannot

replace.

Do not expose the battery to flames, explosions or other hazards.

Do not use sharp objects to remove the battery.

*If the device is on standby mode, a

fully charged battery will last

up to 200 days.

When the battery power is low, the APP

will display “Low Battery”.

When charging, LED will flash to

indicate the level of charge .

Once 100% fully changed, all LED light

will remain on.

1. Make sure your Run Guardian is setup with the App before you

carry it around with you. We strongly recommend to setup this

device with the App to fully utilize its full benefits.

However, even if the device is not connected to the App, you

can press the Alarm Button and it will siren to draw attention. The

LED light can also be activated and use as a warning signal.

2. Clip the Device to a convenient and reachable location.

1. Trousers' Pocket

2. Arm band

3. Belt/Waistband

4. Backpack handle/strap

5. Strap or hang like a necklace

5. Find your Device

If your device is missing, you may use the APP to find it. Open the App

and go to Admin, then click Find My Device.

Your device will alarm. Cancel the alarm sound from your device by

pressing the Setup and Alarm button at the same time.

3. If you will be out and about at night time or in dark areas, you may

use the LED as a light warning device. Short press the setup button to

activate or deactivate the LED.

4. How to Trigger Alarm

If you are in danger, in need of help or in case of emergencies, you

can trigger the alarm through the device or App if your device is not

on your hand.

Never put the unit very close to your ears. The sound of the alarm

is very loud.

Keep it away from moist environment and flammable explosives.

Keep the product dry and clean.

If the unit becomes soiled, use damped cloth or paper towel to

wipe it.

Do not wash or soak in water.

Settings

version： 1.0

Device Name MD328E

Emergency Contact

User Name

Timer

SMS

0.0.27

Firmware Update

Feedback

USER MANUAL

B Setup Button

D Clipper

E Strap/string hole

F Micro USB port

C Alarm Button

A LED Ring light

I. Use Alarm Button on Device

II. Use SOS button on App

Press the Alarm Button on the device

for 2 second to sound the alarm and

send the SOS positioning information to

your emergency contacts. To cancel the

alarm, press the alarm button and the

setup button at same time. Your SOS

message will not be transmitted if you

cancelled the alarm within your defined

countdown timer on the app settings.

Quick press the Alarm Button on the

device twice to send SOS positioning

information to your emergency contacts.

To cancel the message transmission,

press the alarm button and the setup

button at same time and it must be done

within your defined countdown timer on

the app settings.

Select the Alarm Mode on the APP

main screen and click the SOS. Your

device will sound if it is within 15 meters

range and it will send the SOS positioning

information to your emergency contacts.

To cancel the alarm, get hold of the

device, press the alarm button and the

setup button at same time. Your SOS

message will not be transmitted if you

cancelled the alarm within your defined

countdown timer on the app settings.

Select Silent Mode on the APP main

screen and click the SOS to send

positioning information to your emergen-

cy contacts. To cancel the message

transmission, click the timer and it must

be done within your defined countdown

timer on the app settings.

Run Guardian

Rename and personalized

your device

Enter a Name known to

your contacts then Save

Add up to 8 emergency

contacts to be notified in

case of emergencies

Set the SOS countdown

timer between 3-30s

Customize the SMS notifi-

cation sent to your emer-

gency contacts in the

event you triggered your

alarm

Check for the latest

firmware update

Send us feedback in case

you encountered issues

while using the APP or

device

Certified

FCC Warning：

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

NOTE 1: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the

user's authority to operate the equipment.

WARNING: This product contains DEHP and other chemicals

known to the State of California to cause cancer and birth

defects, or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

MD328E

FCC ID:N9KSMARTMD328E