User's Manual

CHAPTER 1
WELCOME
5 smarttech.com/kb/171164
Pens
The display comes with black, red, blue and green pens. Each pen has
an attached eraser and an indicator light.
The display’s bottom frame includes magnetic holders for the pens.
Removing a pen from its holder activates it, and you can use the pen to
draw or erase digital ink. Replace the pen when you’re done using it to
charge it.
When you first turn on the display or pick up a pen from the magnetic holder, the pen’s light turns
on to indicate the pen’s status:
Light Pen status Action
Solid green The pen is charged and can
be used for at least one
hour.
Pick up the pen and use it to write on the
display. Return the pen to the magnetic holder
when you’re done.
Solid amber The pen is charging but can
be used for up to 30
minutes.
Use the pen for a few minutes. Return the pen
to the magnetic holder when done.
Solid red The pen needs to be
charged within an hour.
Finish using the pen and return it to the
magnetic holder when done.
Flashing red The pen needs to be
charged within 10 minutes.
Return the pen to the magnetic holder as soon
as possible.
Flashing green
and red
The pen has not been
paired with the display.
Place the pen in the magnetic holder to pair it
with the display.
Flashing in any
color (while the
pen is in the
magnetic holder)
The pen’s firmware is
updating.
Wait 30 seconds for the pen’s firmware to
complete updating.
CAUTION
When you return a pen to the magnetic holder, make sure it’s centered in its holder to keep it
from falling and being damaged. The pen’s light turns on to indicate that it’s properly positioned
in the holder.