User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
CHAPTER 2
INSTALLING THE DISPLAY
12 smarttech.com/kb/171164
l When transporting the display, do the following:
o
Follow local safety regulations and standards.
o
Keep the display in its original packaging.
o
Move the display so that its top frame faces up.
o
Have at least two people move the display.
Using transportation aides
You can use the following aides to transport the display:
l Cart
l Furniture dolly
l Mechanical lift
NOTE
The display features eyebolt mounting holes for use with mechanical
lifts. Refer to the installation instructions for information on using a
mechanical lift.
Accommodating doorways, hallways and elevators
In some situations, you might need to remove the display from its packaging to move it through
narrow doorways or hallways or on to an elevator. In these situations, SMART recommends that
you keep the foam pieces on the bottom corners of the display. These foam pieces protect the
display if you need to set it down during transport.
You might also need to rotate the display so that its top frame faces to the side. You can do this
during transportation, but when you install the display, it must be in landscape orientation (with the
top frame facing up).