User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
CHAPTER 3
CONNECTING POWER AND DEVICES
23 smarttech.com/kb/171164
Connecting to the convenience panel
In addition to the three sets of computer connectors on
the connector panel, there is one set of computer
connectors on the convenience panel:
HDMI 2: This set of connectors can accommodate
a USBcable for touch control and an HDMI cable for
video and audio.
Viewing a connected computer or other device’s input
Users can use the Input app to view the computer or other device’s input on the display.
For information about the Input app, see the SMARTBoard 7000 series interactive display user’s
guide (smarttech.com/kb/171163).
Connecting external speakers
The display includes two 10 W speakers, which are designed to provide sound at the front of a
room. You might want to connect the SBA-100 projection audio system (see SBA-100 projection
audio system on page8) or third-party external active speakers if you’re providing sound in a
larger space.
You can connect external speakers to the display using the stereo
3.5mm out connector (pictured). Alternatively, you can connect
external speakers directly to a room computer.