User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
CHAPTER 3
CONNECTING POWER AND DEVICES
25 smarttech.com/kb/171164
Connector reference
Display connectorpanel
The following diagram and table present the connectors on the display’s connector panel:
No. Connector Connects to Notes
1 Stereo 3.5 mm out External speakers See page23.
2 S/PDIF out Digital audio output See page23.
3 Stereo 3.5 mm in VGA input (audio) See page21.
4 USB Type-B VGA input (touch) See page21.
5 VGA in VGA input (video) See page21.
6 USB Type-B HDMI 1 input (touch) See page21.
7 HDMI in HDMI 1 input
(videoandaudio)
See page21.
8 USB Type-B DisplayPort input (touch) See page21.
9 DisplayPort in DisplayPort input
(videoandaudio)
See page21.
10 USB Type-A [N/A] This connector is a service port.
11 RJ45 (×2) Network See page20.