User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
CHAPTER 3
CONNECTING POWER AND DEVICES
26 smarttech.com/kb/171164
Display convenience panel
The following diagram and table present the connectors on the display’s convenience panel:
No. Connector Connects to Notes
1 USB Type-A (×2) Supported peripherals [N/A]
2 USB Type-B HDMI 2 input (touch) See page21.
3 HDMI in HDMI 2 input
(videoandaudio)
See page21.
iQ appliance
The following diagram and table present the connectors on the iQ appliance:
No. Connector Connects to Notes
1 RJ45 Network Do not use this connector. Use
the connectors on the display
instead. See page20.
2 USB Type-A (×2) Supported peripherals [N/A]