User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
CHAPTER 3
CONNECTING POWER AND DEVICES
27 smarttech.com/kb/171164
No. Connector Connects to Notes
3 HDMIout N/A This connector is not supported.
4 USB Type-B OPS/HDMI input (touch) Do not use this connector. Use
the connectors on the display
instead. See page21.
5 HDMI in OPS/HDMI input
(videoandaudio)
Do not use this connector. Use
the connectors on the display
instead. See page21.
6 USBType-B [N/A] This connector is a service port.
Other connectors
There are additional connectors on the bottom of the display (see Mounting multiple displays on
page17 and Appendix B: Remotely managing the display on page73).