User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
Chapter 4
29 smarttech.com/kb/171164
Chapter 4: Configuring the display
Turning on the display for the first time 29
Connecting to a network 30
Configuring the network for the display 30
Configuring the network for iQ functions 30
Connecting the display to a network 33
Evaluating the impact of Screen Share on your network data usage 34
Updating system software 35
Applying an automatic system software update manually 35
Updating system software manually 36
Switching to the Beta channel 36
Before switching to the Beta channel 36
Switching between the Beta and Stable channels 36
Getting support and sending feedback 37
Adding or removing apps from the launcher 38
Enabling the Whiteboard Library 38
After you have mounted the display and connected power and devices, you can start it for the first
time and configure the apps as described in this chapter.
Turning on the display for the first time
Turn on the display after mounting it and connecting power and devices.