User's Manual

CHAPTER 4
CONFIGURING THE DISPLAY
30 smarttech.com/kb/171164
To turn on the display for the first time
1. Flick the switch beside the AC power inlet to the ON(I) position.
2. Select your preferred language, and then tap Next.
3. Select your country, and then tap Next.
4. Name the display, and then tap Next.
5. Set the date and time, and then tap Next.
6. If the display isn’t using a wired network connection, select a wireless network, and then tap
Next.
7. Select the list of applications that will appear in the launcher, and then tap Next. For more
information about the apps, see the SMARTBoard 7000 series interactive displays user’s
guide (smarttech.com/kb/171163)
8. Tap Finish.
The Welcome screen appears.
Connecting to a network
You can connect the display to a network using either Wi-Fi or an Ethernet connection. Before you
do so, your organization’s network administrators need to configure the network for the display.
Configuring the network for the display
Network administrators need to configure the network so users can use the Screen Share app,
update the system software automatically over the air and enable the display to set the date and
time automatically.
Configuring the network for iQ functions
Network administrators need to configure the network so users can update the display’s firmware
and system software automatically over the air and to allow apps to function properly.