User's Manual

CHAPTER 4
CONFIGURING THE DISPLAY
34 smarttech.com/kb/171164
To connect to an Ethernet network
Connect an Ethernet cable to the RJ45 receptacle on the display.
NOTE
The network must provide network settings via DHCP. If you require a static IP, use DHCP
reservation on your router.
To add a proxy
1.
Tap the Home button
on the screen.
The launcher appears.
2.
Tap Settings
.
The Settings window appears.
3. Tap Wi-Fi.
4. Tap and hold the network to which you’re adding a proxy.
A dialog box appears.
5. Tap Modify network.
6. Select Show advanced options.
7. In the Proxy box, select Manual.
8. Enter the information in the Proxy hostname, Proxy port and Bypass proxy boxes.
9. Tap Save.
Evaluating the impact of Screen Share on your network data usage
When you connect your device or computer to the display using Screen Share, the screen sharing
protocol compresses the image from your device or computer. The protocol may transmit only
areas of the screen that change. This can make it difficult to estimate the impact of Screen Share
on a network where many users would like to screen share simultaneously.
For example, in a school where 30 teachers are using Screen Share simultaneously, 10% of
teachers might be streaming video while 90% might be sharing static content with occasional
updates. In such an instance, you could expect to see an additional 5 Mbps in network traffic. Use
the following table to help estimate the impact of wireless Screen Share on your network.