User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
CHAPTER 5
CONFIGURING CONNECTED COMPUTERS
40 smarttech.com/kb/171164
IMPORTANT
Make sure a computer meets the minimum requirements in the SMARTNotebook software
release notes before you install SMART Learning Suite.
Setting connected computers’ resolutions and
refresh rates
The following table presents the recommend resolutions and refresh rates for the display’s input
sources:
Input source Resolution Refresh rate
HDMI 1 3840×2160 60Hz
HDMI 2 1920×1080 60Hz
DisplayPort 1920×1080 60Hz
VGA 1920×1080 60Hz
If possible, set any connected computers to these resolutions and refresh rates.