User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
APPENDIX A
USING SETTINGS
68 smarttech.com/kb/171164
Auto Update
NOTE
To prevent automatic system software updates, block access to https://ws.kappboard.com.
Option Values Function Notes
Updates Channel
Stable Channel
Beta Channel
Sets which system software
updates the display receives
When switching from the Beta
Channel to the Stable Channel, a
factory reset occurs. See page64
for more information about factory
reset.
Check for Updates Now
[N/A] Checks for updates to the system
software
NOTE
The display must be connected
to the Internet to check for
system software updates.
If an update is available, the text
changes to Apply update now.
Display
Option Values Function Notes
Adjust Brightness and Contrast
Brightness
0–100 Sets the display’s brightness level [N/A]
Contrast
0–100 Sets the display’s contrast level [N/A]
Audio
Option Values Function Notes
Speakers
Built-in Speakers
On
Off
Enables or disables the display’s
internal speakers
When analog speakers are
connected to the display, it
automatically disables the display’s
internal speakers.