User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
Appendix B
73 smarttech.com/kb/171164
Appendix B: Remotely managing the display
Connecting a computer to the display 74
Connecting multiple displays 75
Configuring the computer’s serial interface settings 75
Power states 76
Commands and responses 76
Commandinventory 79
Resolving issues with remote management 81
You can connect a computer to the room control input on the display to remotely select video
inputs, turn the display on or off and get information about the display’s current settings, such as
contrast and power state.
NOTE
You can remotely manage only the display and not the iQ appliance.