Graphics Tablet User Manual

2 Overview
• a USB 2.0 high speed hub to which you can connect a USB memory storage device
This guide describes how to install and use the DT770 with your computer and integrate the
DT770 with a projector or monitor. For information on using SMART Board software, refer to the
SMART Board Software User’s Guide and the SMART Board software online Help. While reading
the SMART Board Software User’s Guide and the online Help, keep in mind that the DT770 works
like a projected SMART Board interactive whiteboard in the following ways:
• a touch on the DT770 with a finger is equivalent to a touch on the interactive whiteboard with a
finger
• the DT770’s tethered pen (when used with the pen tool buttons) functions like the interactive
whiteboard’s pen tray pens
• the DT770’s function buttons behave like the interactive whiteboard’s control panel buttons
Interactive Screen
The interactive screen tracks the position of objects, such as the tethered pen or your finger. This
screen acts as both an input device and an output device.
Tethered Pen
You can use the tethered pen to control and manipulate items on your screen and to create or
remove digital ink.
You can’t use your finger and the tethered pen at the same time. If the pen is in its pen recess, the
DT770 detects contact between any object and the interactive screen. However, if you remove the
pen from the pen recess, the DT770 detects contact between the pen and interactive screen but
ignores any other contact.
Tethered Pen
Pen Recess