User Manual

CHAPTER 2
USING THE CAPTURE BOARD
10 smarttech.com/kb/170769
To install the app
1. Do one of the following:
a. Start the QR code scanning app on your mobile device,
and then hold your mobile device’s rear-facing camera
over your capture board’s QR code to scan it.
b. Enable NFC in your mobile device’s settings (if it isn’t
already enabled), and then hold your mobile device near
your capture board’s NFC tag .
The Apple AppStore or GooglePlay opens.
2. Download and install the app.
To start the app for the first time
1. Start the SMARTkapp app on your mobile device.
The app tutorial appears.
2. Use the swipe gestures to progress through the screens of the tutorial.
Previous screen Next screen
3. Press Close when you have completed the tutorial.
The app home screen appears.
TIP
If you want to view the tutorial again, do the following:
o
On an Apple mobile device, press Settings on the app home screen and then press
Tutorial.
o
On an Android mobile device, press Menu , press Settings, and then press Tutorial.