User Manual

CHAPTER 2
USING THE CAPTURE BOARD
11 smarttech.com/kb/170769
Starting a session
Start a session by connecting your mobile device to the SMARTkapp capture board. You can do
this by one of the following means:
l QR code
l NFC
l Board ID
NOTE
Some Android mobile devices require you to accept a pairing request to connect to the capture
board. Swipe down on the screen to access the notification drawer and accept the pairing
request.
To connect to the capture board by QR code
1. Start the SMARTkapp app on your mobile device.
2. Hold your mobile device’s rear-facing camera still over the capture
board’s QR code so that the QR code appears in the center of the
app screen.
The app connects your mobile device to the capture board.
NOTE
If the app doesn’t connect your mobile device to the capture board, move your mobile
device closer to or farther away from the capture board so that the app can capture the QR
code.