User Manual

CHAPTER 2
USING THE CAPTURE BOARD
12 smarttech.com/kb/170769
To connect to the capture board by NFC
1. Enable NFC in your mobile device’s settings (if it isn’t already enabled).
2.
Hold your mobile device near the capture board’s NFC tag .
The SMARTkapp app starts and connects your mobile device to the capture
board.
To connect to the capture board by Board ID
1. Locate the capture board’s 10-character ID.
TIP
The Board ID is located by the QRcode.
2. Start the SMARTkapp app on your mobile device.
3.
On an Apple mobile device, press Settings .
OR
On an Android mobile device, press Menu , and then press Settings.
4. Press Advanced, and then press Connect Manually.
The Connect Manually screen appears.
5. Type the Board ID in the Enter ID box.
6. Press Connect.
The app connects your mobile device to the capture board.