Maintenance Guide

C H A P T E R 5
Maintaining your room system
37 smarttech.com/kb/170450
4. Type the room system administrator account’s user name and password in the text boxes, and
then press Authenticate.
The room system restarts, and the Settings screen appears.
5.
Press the Orient button on the interactive flat panel’s color select module.
The orientation screen appears.
6. Use an interactive flat panel pen to press the red targets as they appear. Hold the tip of the pen
at the center of each target, and then lift the pen.
The target moves to the next orientation point.
I M P O R T A N T
Hold the pen perpendicular to the screen.
7. Continue until you’ve pressed all the targets.
The orientation window closes.
8. If this doesn’t correct inaccurate touch control, calibrate the interactive flat panel (see Calibrating
the interactive flat panels on page 34).
Cleaning the screens
Follow these instructions to clean the interactive flat panels’ screens without damaging their
anti-glare coating or other product components.
C A U T I O N
l Do not use permanent or dry-erase markers on the screens. If dry-erase markers are used on
the screens, remove the ink as soon as possible with a lint-free, non-abrasive cloth.