Maintenance Guide

A P P E N D I X A
Using the interactive flat panel on-screen display menu
68 smarttech.com/kb/170450
Option Values Function Notes (if any)
Welcome OSD Enabled
Disable
Enables or disables the welcome
screen
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Welcome Timeout 5–30 Sets how long the welcome screen
appears (in seconds)
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Ready State Brightness 0–100 Sets the brightness of the welcome
screen
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
USB Setting
USB 1 HDMI1
HDMI2
HDMI3/PC
DVI-D
DPORT
VGA
Disable
Sets the video input for the USB1
receptacle, or disables the
receptacle
Don’t change this option from its
default value.
USB 2 HDMI1
HDMI2
HDMI3/PC
DVI-D
DPORT
VGA
Disable
Sets the video input for the USB2
receptacle, or disables the
receptacle
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
USB 3 HDMI1
HDMI2
HDMI3/PC
DVI-D
DPORT
VGA
Disable
Sets the video input for the USB3
receptacle, or disables the
receptacle
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Lync® Room Reset Reset
Cancel
Resets options in all menus to their
default values (for
SMARTRoomSystems)
You use this option when you first
configure the
SMARTRoomSystem (see
Turning on your room system for
the first time on page 12).
CEC Enabled
Disable
Enables or disables Consumer
Electronics Control (CEC) support
on HDMI inputs
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
FBC Control On
Off
Enables or disables the front
control panel
Don’t change this option from its
default value.