User manual

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
89 smarttech.com/kb/170401
Field Possible Values Description
target contactinfo l = User String
current contactinfo l User String
current modelnum l User String Must match the OSD screen
current videomute l on
l off
The ranges must match the OSD ranges
target videomute l = on
l = off
The ranges must match the OSD ranges
current
vgaoutnetenable
l on
l off
Current status of the VGA Out Enable and
Network Enable
target vgaoutnetenable l = on
l = off
Value to set the VGA Out and Network Enable
to.
current
emergencyalertmsg
l User String Emergency Alert Message
target
emergencyalertmsg
l = User String Emergency Alert Message
current emergencyalert l on
l off
To display the alert message, set this value to
on. To clear it, set it to off.
target
emergencyalertmsg
l = on
l = off
If the message is being displayed, return on.
current signaldetected l true
l false
If a signal is currently detected, then this
command returns true. Otherwise false is
returned.
Command List l .... A listing of commands follows the response.
This list does NOT include service information
commands.