Installation Guide

After login， select “+", and add
device.
Connect your phone to WI-FI where device is used, and
download SmartThings App.
SmartThings
1.
2.
3.
Select "SmartThings", in the
"All brands" tab.
Plug the power cable, and wait LED
indicator flashes green and red
alternately.
4.
6.5.
After click “Vision sensor”，select “SmartThings Vision”.
After setup location for your
SmartThings Vision, click next.
7.
Scan the QR code on the device,
as shown in the picture.
If QR code on device or package
is damaged or fell off, device
will be unable to setup. Please
keep QR code safe.
8.
The installation will begin after
scanning QR code.
9.
After the installation is finished,
completion status is as shown in the
picture.
Connecting to Vision sensor
1%
Plug your Vision sensor into an outlet
and wait until the left light starts
blinking green and red.
1%
Add your device by scanning its
QR code.
The code or serial number may be on the
back of the device or in the instruction
booklet.
Enter serial number instead
※
My home
Kitchen >
Living room >
No devices
No devices
Add device
All brands
SmartThings
Auto detect
SmartThings
vision sensor
My home-Living room
Successfully connected
SmartThings Vision
On
SmartThings
vision sensor
Vision sensor
SmartThings Vision
Select a location for your Vision sensor.
My home
Add new location