Installation Instructions

SmartValve 16-2700i Dimensions
Technical Specifications
Electrical
Maximum Voltage
Injection
See Model Table below
Maximum Voltage
(Corona-free)
550 kV RMS line-to-line
Minimum Current for
Monitoring
(1)
50 A RMS
Power
Powered by line current
Minimum Current for
Injection
(1)
100 A RMS
Operational Frequency Range
47.00 Hz – 52.00 Hz
57.00 Hz – 61.00 Hz
Maximum Rate of Change
of Frequency (ROCOF)
Withstand
1 Hz/sec for 1s, 2 Hz/s for 0.25s
Fault Current Rating
(2)
63 kA RMS for 1 second
Peak Fault Current Rating
(2)
164 kA @ 60Hz
158 kA @ 50 Hz
Physical
Environmental
Mass
See Model Table Below
Operating Ambient
Temperature Range
(3)
-40°F to 122°F
(-40°C to 50°C)
Dimensions
See Figure Above
Storage Temperature Range
-40°F to 122°F
(-40°C to 50°C)
Conductor Size Capacity
Agnostic
Condensing Operating Humidity
Range
5% to 100%
Mounting
Deployed in a bank, suspended
from structure via insulators or
as part of a Mobile SmartValve
Unit
Maximum Sustained Rain
4.0 in/hr (102 mm/hr)
Cooling
Liquid-cooling interface
between power semiconductors
and redundant-fan-equipped
liquid-to-air heat exchangers
using redundant pumps all at
line potential.
Sealed intercoolers for
controlling internal ambient
temperature
Intrusion Protection
IEC 60529, Designed to IP
55, Tested to IP X5