User manual

10
Fig. 12 Connecting to a TV-set and Multichannel Audio System
If a user does any changes in MENU>Settings>System setting>TV out settings>HDMI video, he needs to press
APPLY button to get the immediate effect. If AUTO EDID option is selected ON, a resolution and a frame rate
selected are used by the receiver as the initial setting mode only. If AUTO EDID option is selected OFF, a resolution
and a frame rate selected are used by receiver permanently. In some cases (eg TV-projector) EDID connected
monitor has 1080p format but doesn’t have 1080i. In most cases if a TV-set supports 1080p, it usually supports
1080i as well. If Forced to 1080i for interlaced is selected ON, the system sets HDMI for 1080i even if EDID has
1080p (not 1080i) .
Fig. 13 TV settings and HDMI video configuration