User manual

Operation in a Unicable System
52
10.2 Allocation of IF channels and frequencies
Receiver IF channel Exemp. frequency (MHz) Frequency (MHz)
Receiver 1 1 1284
Receiver 2 2 1400
Receiver 3 3 1516
Receiver 4 4 1632
Receiver 5 5 1748
Receiver 6 6 1864
Receiver 7 7 1980
Receiver 8 8 2096

 Enter the frequencies of your receiving system into the last column of
the table so that all relevant information is quickly available. Rule of
thumb: highest frequency  shortest cable path.
10.3 Installation
If the receiver is connected to a unicable
system, then RAPS installation will auto-
matically cancel. The window to the right
will open.
1. Press the red function key (SHIFT) to
open the submenu Antenna Setup.
2. Select the menu item LNB Freq to set
Unicable(9750-10600) .
3. Press the green function key to open
the window Antenna Setup Unicable
Setting.
4. Select the menu item IF Channel and
set the IF channels (start with channel
1; respectively allocate one of the IF
channels - in ascending order - to the
connected receivers).