User's Guide

Inforce 6720™User Guide System Setup and Usage
003767 Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 8
Confidential and Proprietary – Inforce Computing, Inc.
Provided under NDA
3.4 INTERFACES
Following are the interfaces on the Inforce 6720.
Table 6: Interface Functions
Interface
Comments
Ethernet
o Connect directly to LAN port for Ethernet access
o Connect to a POE+ Injector or POE+ capable switch for
Ethernet access and Power input
12V DC
o Connect Power Adaptor DC plug for Power input
HDMI In
o Connect HDMI source using HDMI cable
HDMI Out
o Connect to Monitor using HDMI cable for Display
USB-C
o Connect to PC using USB-C to USB Type-A cable for
ADB debug access
o Connect to Monitor using USB-C to DisplayPort cable
for Display
GPS
o Connect SMA Male Plug GPS Antenna
Audio
o Connect Headphone with MIC for audio
USB
o Connect USB Type-A compatible devices e.g., mouse
microSD
o Insert microSD card for data access
3.5 STEPS TO BOOT INFORCE 6720
1. Connect the DC power adaptor or POE Injector to the Inforce 6720.
CAUTION
Use only the DC power adaptor provided by Inforce Computing.
2. Connect the HDMI Out to a compatible Monitor using an HDMI cable.
3. Switch ON the DC adaptor or POE+ Injector.
4. Press the Power button to boot up.
5. Display will come up on the HDMI monitor once Inforce 6720 boots up.
NOTE
First time booting might take longer time than normal booting.