User's Guide

Inforce 6720™User Guide System Setup and Usage
003767 Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 9
Confidential and Proprietary – Inforce Computing, Inc.
Provided under NDA
3.6 FASTBOOT MODE
Follow the below steps to enter fastboot mode:
1. Power ON and boot up the Inforce 6720
2. Connect the USB-C port of 6720 to host PC using a USB Type-C to Type-A cable
3. Once the 6720 is booted up, open the command prompt in the PC and enter the following
command
• adb devices
4. Once ADB device is listed, enter bootloader using following command
• adb reboot bootloader
5. To confirm if the device has entered fastboot mode, use below command
• fastboot devices