User Guide
Table Of Contents
smarttech.com/kb/171370 13
Chapter 3 Using the stand
Moving the stand 13
Raising, lowering, calibrating, and resetting the stand 14
Calibrating the stand 14
Raising and lowering the stand 14
Resetting the stand 15
Moving the stand
Warning
l
Do not use the handles to lift the stand.
l
Do not move the stand while external cables are connected or when the power is on.
l
Move the display to its lowest position before you move the stand.
l
Secure all cords and cabling before you move the stand.
l
Two or more people are required to move the stand.
l
Move a floor stand-mounted display with care. Quick stops, excessive force, and uneven surfaces
may cause the stand to overturn.
To move the stand
1. Shut down the mounted display and accessories.
2.
Press and hold the Down button on the control panel until the display reaches its lowest position.
3. Flick the power switch to the off position.
4. Remove all loose items from the stand and the storage cabinet.
5. Unplug the stand from the power outlet and secure all cables.
6. Flip the caster brakes up to unlock them.
7. Carefully push the center point of the legs to move the stand. Do not push on the upper part of the
stand, as this might cause it to tip over.