User Guide
Table Of Contents
smarttech.com/kb/171370 3
Important information
Note
Refer to the illustrated
installation instructions for important information about installing and setting up
the stand.
Warning
l
Read the following warnings carefully. Failure to read the warnings below or to follow the
installation instructions included with the stand could result in personal injury or product damage.
l
The assembly and installation of the stand is intended for a trained professional.
l
The installer must follow the installation instructions. Not doing so can result in injury or damage
to equipment.
l
Use only SMART-supplied mounting hardware or hardware that is designed to properly support
the weight of the mounted display and accessories.
l
Use the FSE-400 stand only with SMART Board interactive displays with diagonal measurements
that range from 55" (139 cm) to 86" (219 cm) and that weigh between 77 lb. (35 kg) and 200 lb. (91
kg). Using the stand with other displays might be unstable and could result in injury.
l
Use the stand only for lifting a display that meets the size and weight limitations indicated in the
product specifications. Do not use the stand to lift people or objects.
l
Do not overload the stand with too much weight, as this can cause injury or damage to the stand.
l
Lock the casters before raising or lowering the stand.
l
Operating the stand can create a hand-crushing or hand-pinching hazard. To prevent injury,
keep hands and people away from crush and pinch locations on the stand.
l
Allow adequate clearance above and below the stand to ensure safe raising and lowering.
l
Do not operate the stand if it is damaged.
l
Do not use the stand near water.
l
Allow only adults who are trained and able to use the stand safely to operate it.
l
Do not allow children or people who are not able to safely operate the stand to use it.
l
Do not allow children to operate or play with the stand.