Content Safety Precaution .............................................................................................2 1. Reference 1.1 General Features ..............................................................................3 1.2 Accessories ........................................................................................4 2. Basic Function 2.1 Front Panel .......................................................................................5 2.2 Rear Panel ................................
Safety Precaution This STB has been designed and manufactured to satisfy the international safety standards. Please read the following safety precautions carefully before operating this receiver. Main Supply: Before operating, please check the units operating voltage is 90~240V AC 50/60Hz. Overload: Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or touch it with wet hand as this may result in electric shock.
1. Reference 1.1 General Features MPEG-2 & Fully DVB Compliant MPEG-2 Video (MP@ML), MPEG-1 Audio Layer1, Layer2 PLL RF-Modulator UHF 21~69 with PAL B/G,I,D/K Multi LNB Control by DiSEqC 1.0,1.2,1.
1.2 Accessories User manual Remote Control Unit A/V Cable Batteries Figure 1.
2. Basic Function 2.1 Front Panel 1. Power Button The POWER button is used to turn the power on or to make it on Standby Mode. 2. Up/Down Button / Change channel in viewing mode and move the cursor up/down in menu mode. 3. Left/Right Buttont / Increase / decrease the volume in viewing mode and change settings in menu mode 4. OK Button Activate the highlighted sub menu in menu mode and activate the channel list in viewing mode. 5. MENU Button Activate the main menu in viewing mode, or exit all menu. 6.
Power indicator 8.
2.2 Rear Panel Figure 3. Rear Panel 1. LNB IN 13/18V 500mA Max Connect the Satellite Dish LNB. 2. LOOP OUT Output the Dish LNB IN signal. 3. RF IN Connect to the antenna of TV to Aerial IN. 4. RF OUT Connect to conventional TV. 5. AUDIO, VIDEO Connect to Audio/Video of TV. 6. 0/12V Supply 12V DC to other apparatus. 7. RS232 Connect to serial port of PC for software upgrade. 8. Electric Inlet Lead Mains 90~240V AC (Auto selectable), 50~60Hz, Make sure to check the power spec. 9. Power AC Power Switch. 10.
2.3 Remote Control Unit(RCU) You can control this receiver by this remote controller with full function. 1. POWER : Switch the receiver on or set it to standby mode. 2. MUTE: Turn the sound On/Off. 3.NUMERIC KEY (0~9): Change program or input number. 4. RECALL: Move to the previous viewed channel. 5.INFO: Show the information of the current channel. press EXIT button to exit this menu. 6. MENU: Activate main menu or exit to live channel. 7. EXIT: Exit current menu step by step. 8. CH/: Change program. 9.
Show the teletext content if teletext is transmitted. 19.PAUSE: Freeze the picture. 20.SLEEP: Sleep timer function 21.SUB: Subtitle. 22.FIND: Find Channel by channel name. 23.PIP: Picture in Picture. 24. REC: Record and playback 10 seconds. 25.M.P. Multi picture.
3. Installation and Connection The following diagram shows you the connections among receiver, TV, VCR, LNB and other equipment, please read this first if you are not sure about the connection, and it will guide you to the correct connection. 3.1 Connecting to TV & VCR 1. Connect the TV antenna to AERIALIN. 2. Connect the RF-IN of TV to RF-OUT. 3. Connect the Video and Audio of TV to the Video and Audio. Connect Red and White connector to Audio R and Audio L, and Yellow into Video port respectively. 4.
3.2 Connecting to Dish LNB You can connect one fixed dish LNB directly to the LNB IN, or connect at least two dish LNB by DiSEqC Switch, you can also connect to HH mount dish LNB. 1. Connect the TV antenna to AERIAL IN. 2. Connect the RF-IN of VCR to RF-OUT with RF cable. 3. Connect the RF-OUT of VCR to the RF-IN of TV. 4. Connect the Video and Audio of TV to the Video and Audio. Connect Red and White connector to Audio R and Audio L, and Yellow into Video port respectively. COMPUTER Figure 6.
Figure 7.
4. Installation and Operation Ater connecting the receiver to other required equipment, turn on the receiver, there should be no channel information available at the first startup, you need to follow the procedure to setup your receiver to search the channel. 4.1 Menu Guide During the installation there is a short information showed at the bottom of the menu screen which will guide you to set up, after finishing installation, you can enjoy watching TV or listening Radio.
A: System Configuration Select System Configuration and press OK, you will get this window. Here you can change Menu Language, Audio Language, OSD Time Out ,Transparency ,Channel Option and Auto Power B: TV Output You can setup TV Type as PAL or NTSC, Screen Type as 4:3 or 16:9 or other format and RF. C: Parental Control You can select if need the password or not for Installation, Edit Channel, System, also you can change the password, the default password is 0000.
E: Time Setup When you Enable this option, and press OK, you will get this window to setup time, at GMT on item, if select on, you can go to the second item to change GMT offset which you want. Or you select off GMT. You can go to the third item to input your local time. F: Timer Here you can set your favorite channel to begin broadcasting at future time you set, including both TV and Radio, you can add, edit and delete the event you set. In this menu, you can setup Antenna, and Search channels.
Motor If you connect receiver to DiSEqC1.2 or DiSEqC1.3 antenna, set motorized system to DiSEqC1.2 or USALS, Here press OK button to enter motor system. Position Auto [W/E] Press / button, the dish will be motorized to East/West continuously, it will stop until it find the best signal. Move Dish Push / button, the dish will be motorized to East/West step by step until you find the best signal showed on the signal bar. Fine Tuning Set the moving step. Move Step Move East or West step by step.
USALS Setup If you use USALS, Press RED key to setup you Local parameters. A-1 :Delete Press RED key to delete the selected sat, then will show a window ask you to confirm. Select OK confirm and EXIT to abort this action. A-2 : Add Press Yellow key to add new satellite. A-3 :Rename Press BLUE key to rename current satellite name.
A-4 :Start Scan Press GREEN key to go to Satellite Scan menu to search channels. B: Satellite Scan In this menu you can set scan mode and which type of channels you want to search by RIGHT/LEFT / UP/DOWN / . Then Press OK to start search. B-1: Search Channel In this menu you can see the search Result. During searching the TV channel and Radio channel will be listed separately. C: Tp Edit/Scan Here you can Edit the transponder and scan channel.
Tp Delete If you want to delete tp, go to the Tp delete item ,and press OK Button. D: Factory Reset Press OK to Reset the STB system, to load default setting and channel list.
You can play the game in this sub-menu. Press UP/DOWN / and OK button. A: Calendar This is the calendar, and it will give you the convenience to check the date of your day. B: Tetris You can see play Tetris on the screen. Press RIGHT/LEFT / UP/DOWN / to play. C: Sokoban You can see play sokoban on the screen. Press RIGHT/LEFT / UP/DOWN / to play.
D: Snake You can see play Snake on the screen. Press RIGHT/LEFT / UP/DOWN / to play. D: Mine sweeper You can see play Snake on the screen. Do follow as bottom help. E: Slot machine You can see play Slot Machine on the screen. Do follow as bottom help. F: Numeric puzzle You can see play Numeric puzzle on the screen. Press RIGHT/LEFT / UP/DOWN / to play.
G: matching picture You can see play matching picture on the screen.
4.2 Other Useful Information This will guide you on how to use general info while watching TV program or listening Radio program. General Information In the viewing mode when you press INFO button to view the detailed program info. Program Guide Press EPG button on remote control, you can get the electronic program guide if applicable. Press / and press GREEN key to show the electronic program guide of the selected channel. You can get the detailed information about that program by pressing INFO.
Channel List-OK In viewing mode press OK , FAV button and you will get this window. a. Favor Group Press RED key go to this menu. OK to set favorite .And press / to Favor Group list to change current FAV. b. Channel Edit Press GREEN key go to this menu. You can Press RED,GREEN,BLUE key to Lock, Move, Rename the channel. Also you can press YELLOW key to add new channel. c. delete Press YELLOW key go to this menu.
b. Channel mode Press BLUE key. In this menu ,you can select the mode you channel list. AUDIO In viewing mode press AUDIO button and you will get this window. You can set the Audio mode here. SAT Press SAT button on the remote control, you will get this menu which contains the satellites you searched and stored, press / to switch between satellites you searched, all channels will be listed under that satellite you selected.
TXT Press the TEXT button and you will get a window to view the teletext contents if the teletext is transmitted in the channel. The Teletext content is watchable by OSD even your TV does not support the Teletext. PAUSE Freeze the picture RECALL: Press recall button you will get the viewing history of last 16.
ZOOM: Picture Zooming function. TV/RADIO: In this window you can select channel and delete/undelete channel, rename channel, sort channel, move channel, lock channel, skip channel, set favor channel. Select Channel Manager, you will get this window. M.P.: Multi picture In viewing mode ,press M.P. you will get the multi picture selection ,select one and press ok ,multi picture will be displayed. Move up/down, left/right to select channel, press M.P.
FIND: In this menu ,you can Find Channel by channel name. PIP : picture in picture You can press PIP to enter PIP mode, then press F1 to exchange between big picture and small picture. Press PGUP/ PGDN to change the channel of small picture, by left, right, up and down button you can move the position of small picture. Also press EXIT key to exit PIP mode. F2 : Subtitle Showing Subtitle information if the channels contains.
5. Additional Information 5.1 Problem Solving You might meet abnormal working of this STB with various reasons, check the following which may help you. Problem Possible causes What to do Mains supply cable is not connected. Check if the mains supply cable is plugged into the power socket. Satellite dish is not aiming to satellite accurately. No signal or weak signal. The LNB is faulty. The cable is faulty. Adjust the dish. Check the signal strength indicator in one of the channel search submenus.
5.2 Technical Specification Tuner & Demodulator Frequency Range 950 MHz to 2150 MHz Input Connector F-type, IEC 169-24, Female Signal Level -25 to -65 dBm RF Impedance 75Ωunbalanced IF Band width 55 MHz/8Hz(Per 5Msps) LNB Power & Vertical : +13 V, 14V +/-5% Polarisation Horizontal : +18 V, 19V+/-5% Current : 500 mA Max. Overload Protection LNB Tone Switch 22KHz+/-2KHz, 0.6Vpp+/-0.2V DiSEqC Control Version 1.0/1.
5.
5.4 Glossary Antenna A device that collects and radiates electromagnetic waves. Includes a satellite dish and a broadband antenna. DiSEqC DiSEqC(Digital Satellite Equipment Control)system, it is a communication bus between satellite receivers and peripheral equipment using only the existing coaxial cable. DVB The Digital Video Broadcast group was created to establish a technical framework for the introduction of digital video broadcasting systems.
PID(Packet Identifier) A set of numbers that identifies transport stream packets containing data from a single data stream. Polarization Polarization allows several programs to be fit into the same frequency band. The signals from a satellite are transmitted either with linear (vertical or horizontal) polarization or circular (right or left) polarization. QPSK(Quaternary Phase Shift Keying) Phase-shift keying in which four different phase angles are used.
