User Guide

110 Weather outlook
Car cover*
Car cover*
Do not use the car cover to conceal ex
tremely dirty vehicles, as the dirt parti
cles will act like sandpaper on the
paintwork.
>Important!
If the vehicle is to be continually cov
ered up for longer than a month, the roof,
engine compartment and luggage com
partment areas must be ventilated at
those areas where the car cover makes
contact with a large surface. The vehi
cle’s paintwork may absorb moisture,
which has to be released. If the absorbed
moisture is not released again, blotches
may form on the paintwork. In order to
prevent such stains from forming, spac
ers – made, e.g. from expanded polysty
rene – should be inserted between the car
cover and the vehicle surface to ensure
that sufficient air can circulate.
Fitting the car cover
The car cover has been folded ex works so
that when it is unrolled, the material’s
foambased side always faces the body
work.
쮿 Roll the car cover over the vehicle roof
from the rear to the front.
쮿 Unfold the car cover on both sides.
쮿 Pull the cord tight so that the cover has
a taut fit.
Removing the car cover
쮿 Slacken the cord.
쮿 Fold the sides up onto the vehicle roof.
쮿 Roll the car cover over the vehicle roof
from the front to the rear.