User Guide
120 Variable driving enjoyment
Windblocker*
Windblocker*
You should be aware of the following:
The screws, double panes and spanner
are only required for firsttime as
sembly.
The windblocker should always be
stowed in the original PE bag after use.
Mounting the windblocker
쮿 Screw the enclosed double panes to the
pull rods (A) using the enclosed span
ner. This mounting process needs to be
carried out only once.
쮿 Gently tighten the screw (to a maximum
torque of 0.7 Nm). There is a hole in the
pull rods for this purpose.
쮿 Take the windblocker and stand behind
the vehicle with the soft top lowered.
> There are small rectangular open
ings (B) on the roll bar’s plastic
shells.
> On the windblocker you will find the
corresponding securing flaps to fit
into these openings (C).
쮿 Fix the windblocker in the plastic
shells on both sides of the roll bar as
shown in (C). The plastic flaps should
face inwards.