User Guide

234 Communications breakdown
Bulbs
쮿 Press the taillight forward and remove
the retaining lugs from the holes in the
body (C).
> You can now remove the taillight.
쮿 Push back the tab (D).
> You can remove the bulb holder.
쮿 Remove the defective bulb.
>Note!
Installation occurs in reverse order.
Changing the interior light at the rear
You need a 12 V 7 W bulb.
쮿 Lever the rear light out of its holder
with a coin (A). To do this, position the
coin from the passenger side.
쮿 Unclip and remove the surround from
the lens (B).
쮿 Remove the bulb from the holder.
>Note!
Installation occurs in reverse order.
When replacing the interior light, make
sure that the clip (C) is located to the left.
Changing the third brake light
쮿 Loosen and remove the retaining
screws (A).
쮿 Remove the lens (B).
쮿 Remove the reflectors (C).
쮿 Remove the faulty bulb (D) from its
holder.
>Note!
Installation occurs in reverse order.