User Guide

84 Communication
Telephone console*
쮿 Remove the cover cap on the centre tun
nel console.
쮿 Release the Torx screw beneath it us
ing a suitable screwdriver.
쮿 Pull up and remove the gearshift lever
knob (on vehicles with softouch*, take
care not to press the automatic button
when pulling it off!).
> The centre tunnel console can be
dismantled.
The centre tunnel console is fastened to
the vehicle by means of two detent hooks
at the front.
쮿 Bend open the console at the round in
serts.
쮿 Lift the centre tunnel console and re
move it.
쮿 Place the centre tunnel console on a
flat working surface.
쮿 Push the telephone console beneath the
centre tunnel console until the under
sides are parallel and the rounded sec
tion at the rear edge of the telephone
console is parallel with the insert in
the centre tunnel console.
쮿 Insert the enclosed screws through the
designated holes, and screw them di
rectly into the plastic of the centre
tunnel console.