User Guide

180 Loading up
Storage compartments and trays
Installed position
 Between the driver and passenger foot
wells
 Always in the lowest position in the
vertical console
>Note!
If you also have purchased the cassette
box* or CD box*, always fit the drinks
holder last.
Installing and removing
쮿 Guide the drinks holder diagonally
from above towards the lowest mounting
in the vertical console.
쮿 Place the drinks holder on the centre
console. When you do this
 the drinks holder housing must rest
against the vertical console (A).
 the lateral guides (B) of the drinks
holder must rest against the centre
tunnel.
쮿 Press the drinks holder firmly against
the carpet.
쮿 Screw the drinks holder handtight
with a coin.
쮿 Check that the housing is located se
curely and fit the cover cap (C).
>Note!
Removal is done in the reverse order.
Accident risk!
After driving approx. 10 km,
check that the drinks holder is firmly
positioned and retighten the retaining
screws if necessary. If this is not done,
the drinks holder could work loose and
fall into the driver footwell.