User Guide

Communications breakdown 239
Breakdown set*
쮿 Remove the stopper from the filler hose
and push the end of the hose onto the
tyre valve.
쮿 Hold the bottle with the filler hose
pointing downwards and squeeze it.
쮿 Press the entire contents of the bottle
into the tyre.
쮿 Pull the hose off the valve and remove
any residual sealant from the valve, rim
and/or tyre.
쮿 Screw the original valve insert (or the
replacement one if necessary) back into
the valve with the valve remover.
쮿 Fit the compressor's air hose accurate
ly onto the valve.
쮿 Plug the power connection into the 12
volt power socket.
쮿 Inflate the tyre to at least 1.8 bar (max
imum 2.5 bar).
>Note!
Do not run the electric compressor for
more than six minutes. If you do so, there
is a risk of overheating!