User Guide

240 Communications breakdown
Breakdown set*
>Note!
If a pressure of 1.8 bar cannot be gener
ated, disconnect the compressor from the
wheel. Carefully drive the car 10 meters
forward or backward to distribute the
tyre sealant in the tyre.
Inflate the tyre again.
Accident risk!
If a pressure of 1.8 bar still can
not be achieved after five minutes, the
tyre is too badly damaged.
Do not drive any further. Consult a
qualified specialist workshop which
has the necessary specialist knowledge
and tools to carry out the work re
quired.
smart gmbh recommends that you visit a
smart center for this. In particular,
work relevant to safety or on safetyre
lated systems must be carried out at a
qualified specialist workshop.
Accident risk!
Do not exceed the maximum speed
of 80 km/h. The "max. 80 km/h" sticker
must be affixed within the driver's
field of vision. The vehicle's handling
characteristics may be affected.